Asus

*Before You Begin Installation, make sure you have the following:Power Adaptor (AC to DC) Ethernet Cable Desktop or Laptop

  • Step 1: Connect the included power adapter to electric power Source and your router.
  • Step 2: Connect the Ethernet cable to the WAN (internet from wall or Modem) port of both your modem and router, connecting the two. (WAN ports are normally yellow)
  • Step 3: Give it a moment to start up with a light indication on router and modem.
  • Step 4: Plug-in your Ethernet cable to your computer.
  • Step 5: Open any browser you have on your computer (recommended Google chrome).
  • Step 6: In the web address bar type in login http://192.168.1.1
  • Step 7: Login ID : Admin and Password:password and click [OK].
  • Step 8: Login ID : Follow the instruction then you are good to go. *If you still have difficulty in setting up Please take assistance from expert.
Router Support Asus
Router Support Belkin

Belkin

*Manual Installation Guide for Belkin router. Make sure you have the following:Power Adaptor (AC to DC)Ethernet Cable.Desktop or Laptop computer

  • Step 1: Connect the included power adapter to electric power Source and your router.
  • Step 2: Connect the Ethernet cable to the WAN (internet from wall or Modem) port of both your modem and router, connecting the two. (WAN ports are normally yellow)
  • Step 3: Give it a moment to start up with a light indication on router and modem
  • Step 4: Plug-in your Ethernet cable to your computer.
  • Step 5: Open any browser you have on your computer.
  • Step 6: Put the CD into your computer. If the CD doesn’t open automatically, browse to your CD folder look for exe files or double-click on the Belkin Setup. Install the software.
  • Step 7: After a brief installation, the setup software will ask you for the network name and password from the network information card that is attached to your Router. Store the card under the base of your Router for future reference.
  • Step 8: Network Name (SSID) and Password.
  • Step 9: A progress screen will appear while additional software is installed. This may take a few minutes to complete. Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router.
  • Step 10: If you’re still having trouble running the manual setup option, type “192.168.2.1” in your browser address and enter. *If you still have difficulty in setting up please take assistance from expert

Cisco

*Cisco Router Manual Help Before You Begin Make sure you have the following:Power Adaptor (AC to DC)Ethernet Cable Desktop or Laptop

  • Step 1: Connect the included power adapter to Electric Power Source and your router
  • Step 2: Connect the Ethernet cable to the WAN (internet from wall or Modem) port of both your modem and router, connecting the two. (WAN ports are normally yellow)
  • Step 3: Give it a moment to start up with a light indication on router and modem
  • Step 4: plugin your Ethernet cable to your computer
  • Step 5: open any browser you have on your computer
  • Step 6: Open your browser and type in www.linksys.com search for "Linksys Connect Setup Software" Download the set up files and run it. Accept the term and condition. It will you give basic manual.
  • Step 7: It will show you SSID and password also you can customize in your choice.
  • Step 8: Login ID : Follow the instruction then you are good to go
  • If you still have difficulty in setting up Please take assistance from expert.
Router Support Cisco
Router Support D-link

D-link

*Before You Begin installation, make sure you have the following:Power Adaptor (AC to DC)Ethernet Cable Desktop or Laptop

  • Step 1: Connect the included power adapter to electric power source and your router
  • Step 2: Connect the Ethernet cable to the WAN (internet from wall or Modem) port of both your modem and router, connecting the two (WAN ports are normally yellow).
  • Step 3: Give it a moment to start up with a light indication on router and modem.
  • Step 4: Plug-in your Ethernet cable to your computer.
  • Step 5: Open any browser you have on your computer.
  • Step 6: In the address bar type in 192.168.0.1 or http://dlinkrouter.local
  • Step 7: Login ID : Admin and Password (Default: Password).
  • Step 8: Login ID : Follow the instruction then you are good to go. *If you still have difficulty in setting up Please take assistance from expert.

Netgear

*All the routers has almost same procedure to set up Installation Guide Make sure you have the following:Power Adaptor (AC to DC)Ethernet Cable Desktop or Laptop

  • Step 1: Connect the included power adapter to Electric Power Source and your router
  • Step 2: Connect the Ethernet cable to the WAN (internet from wall or Modem) port of both your modem and router, connecting the two. (WAN ports are normally yellow)
  • Step 3: Give it a moment to start up with a light indication on router and modem
  • Step 4: plugin your Ethernet cable to your computer
  • Step 5: open any browser you have on your computer (recommend Google chrome browser)
  • Step 6: In the address bar type Web address: www.routerlogin.net or www.routerlogin.com
  • Step 7: Login ID : admin and Password: password
  • Step 8: Login ID : Follow the instruction then you are good to go If you still have difficulty in setting up Please take assistance from expert.
Router Support Netgear
Router Support Tenda

Tenda

*Before You BeginInstallation Make sure you have the following:Power Adaptor (AC to DC)Ethernet Cable Desktop or Laptop

  • Step 1: Connect the included power adapter to Electric Power Source and your router
  • Step 2: Connect the Ethernet cable to the WAN (internet from wall or Modem) port of both your modem and router, connecting the two. (WAN ports are normally yellow)
  • Step 3: Give it a moment to start up with a light indication on router and modem
  • Step 4: plugin your Ethernet cable to your computer
  • Step 5: open any browser you have on your computer (Google chrome recommend)
  • Step 6: In the address bar type in 192.168.0.1/log/app
  • Step 7: Login ID : admin and Password: password
  • Step 8: Login ID : Follow the instruction then you are good to go If you still have difficulty in setting up Please take assistance from expert

Range Extender

*A  Range Extender, Wi-Fi Booster or Wi-Fi Extender or Wi-Fi repeater is a device that broadcast the wireless network signal from router to longer distances however your network from your router remain the same.

  • Step 1:Remember to get best internet speed from your Range Extender; you need to make sure you place the Range Extender at the area where you get the strongest Wi-Fi signal from your router.
  • Step 2: Plugin your Extender to Power Source and wait for a moment to Start it up it takes few seconds or a minute. Once see a green light blinking go to your router.
  • Step 3: On your Router, press the WPS button one time.
  • Step 4: Now check your Range Extender still blinking or turn into solid green.
  • Step 5: If the green light on your Extender turn into solid green that means you are good to go otherwise take assistance from expert. Attempting a lot you may make mistake with your router settings.
Wireless Router support Services
Router Support Services

TP-Link

*Before You BeginInstallation Make sure you have the following:Power Adaptor (AC to DC)Ethernet Cable Desktop or Laptop

  • Step 1: Connect the included power adapter to Electric Power Source and your router
  • Step 2: Connect the Ethernet cable to the WAN (internet from wall or Modem) port of both your modem and router, connecting the two. (WAN ports are normally yellow)
  • Step 3: Give it a moment to start up with a light indication on router and modem
  • Step 4: plugin your Ethernet cable to your computer
  • Step 5: open any browser you have on your computer
  • Step 6: In the address bar type in 192.168.0.1 orwww.tp-link.com/en
  • Step 7: Login ID : admin and Password:password
  • Step 8: Login ID : Follow the instruction then you are good to go If you still have difficulty in setting up Please take assistance from expert